A QR code menu is a web page that guests open by scanning a printed code with their phone camera. No app is needed: the cameras on current iPhones and most Android phones read QR codes directly. Whether it works well at the table comes down to a few decisions that are easy to overlook.
1. Decide what the code opens
A QR code holds nothing but an address. What matters is whether that address stays under your control:
- Static code: the destination is written into the code itself, for example the link to a PDF in a cloud folder. If the link changes, you reprint.
- Redirecting code: the code points to a short, fixed address that you can later send somewhere else. You print once. The catch: the code only works while the service behind it does. Ask what happens to your codes if you cancel.
Also decide whether one code for the whole venue is enough, or whether you want one per place, such as “Terrace”, “Bar” or “Room”. Separate codes can be changed and counted on their own.
2. Write the menu for a phone
Guests read differently on a phone than on paper: they scroll, tap and compare. This helps:
- Clear categories in the order people eat: starters, mains, desserts, drinks.
- Short names and one line of description with the main ingredients. Nobody reads long paragraphs at the table.
- Prices written the same way every time, with the currency. For wine, a price per glass and per bottle.
- Labels like vegetarian, vegan or spicy used consistently, so guests can filter by them.
Allergens
In Switzerland and the EU, guests must be able to find out which of the 14 main allergens a dish contains. How you provide that is set by local rules: in Switzerland, for food that is not pre-packed, a verbal answer is enough as long as a written note tells guests they can ask. A digital menu makes per-dish information easier, but the responsibility stays with the kitchen. This is not legal advice; your local food authority can confirm what applies to you.
3. Photos that sell, taken with a phone
You don’t need a photographer to start. Begin with the dishes guests ask about most.
- Daylight from the side, close to a window, no flash.
- The same angle every time: from above for flat plates, about 45 degrees for burgers, glasses and desserts.
- A calm background and a clean plate rim. One dish per photo.
- Landscape 4:3 crops well on phones and in lists.
Entries without a photo are fine. A line of text, as on a printed menu, is better than a placeholder image.
4. Print the code properly
- Size: as a rule of thumb, make the code about a tenth as wide as the scanning distance. On a table, scanned from 30 to 40 cm, that is 3 to 4 cm. Below 2 × 2 cm it becomes unreliable.
- Quiet zone: leave a light margin of at least four modules (four of the small squares) around the code. Don’t print it to the edge of the card.
- Contrast: a dark code on a light background. No glossy, reflective material and no colour gradients inside the code.
- One line of text: “Menu: scan with your camera”, with the short web address underneath for anyone who can’t or won’t scan.
Keep a few printed menus for guests without a phone or with a flat battery.
5. Test before service
- Scan with at least one iPhone and one Android phone, from a normal seated distance.
- Open it once over mobile data instead of Wi-Fi, as most guests will.
- Go through the menu in every language you offer.
- Check in dim light that text and prices are easy to read.
6. Keep it current
The biggest advantage over paper is that changes show up immediately. Decide who on the team updates prices and sold-out dishes, and check the menu on your own phone after each change.
With MyPictureMenu: QR codes redirect through a fixed address and keep working when you change dishes, prices, PDFs or what a code opens. You tick allergens per dish and guests read them in their language. Codes download as PNG, SVG or a printable A6/A5 card. Explore the live demo or create your free menu.